Sound Devices 302 Portable 3 Channel Field Mixer


The Sound Devices 302 is a professional, compact 3 channel audio mixer designed to meet the demands of professional film, ENG / EFP and broadcast applications.Best buy / sale in Kuala Lumpur, Malaysia.

Found Cheaper Price Elsewhere?

Inform us and we will try BEAT the PRICE and make you HAPPIER!



The Sound Devices 302 is a professional, compact 3 channel audio mixer designed to meet the demands of professional film, ENG / EFP and broadcast applications. Its compact design, extensive feature set and superior audio quality justify the mixer’s popularity among industry professionals. The 302 features 3 balanced XLR inputs that are capable of accepting mic or line-level signal (user switchable). The output stage features stereo (L/R) balanced XLR outputs that are also mic or line level switchable (factory set to line, refer to manual for mic level set up).

A user friendly control panel is accessible at the top of the unit for easy set up of additional functions or signal routing. Each channel provides individually switchable +48V, +12V and +12V-T phantom power for condenser microphones. Channels 1 and 2 are stereo linkable and a polarity (phase) reverse switch is provided on channel 2. This makes the 302 ideal for M-S stereo style capturing and monitoring. Input and output limiters are user switchable and eliminate noise and distortion caused by signal overload. Low-cut filter switches eliminate noise below 80Hz and the unit is powered by 3 AA batteries or external 5 – 18VDC power source.

3 Transformer Balanced Inputs
The compact mixer features 3 transformer balanced microphone or line level switchable inputs via XLR female 3-pin connectors.
Flexible Monitoring
The 302’s headphone monitor out is capable of varying output impedance between 8 to 1000 ohms. The monitor source is capable of individual channel, mono, stereo, M-S to stereo monitoring and more.
Input and Output Limiting
Each input and stereo outputs provide input and output limiting that prevents signal overload, eliminating noise and distortion.
Polarity (Phase) Reverse Switch
Channels 1 & 2 are stereo linkable, channel 2 features a polarity (phase) reverse switch. This makes the 302 ideal for decoding M-S stereo captured audio signal.
Selectable Phantom Power
The unit is capable of powering condenser microphones requiring +48V, +12V and +12V-T phantom power. Phantom power is individually switched for every channel.
Low Cut Filter
A low-cut filter switch is available on every input, removing noise and rumble below 80Hz.


3 – 3-pin LR female: microphone / line level level

Output 2 – 3-pin LR male: microphone / line level refer to manual for set up
Monitor/Headphone Out PHONES: 1/8″ (3.5mm) mini stereo output jack
ALT I/O RN: 1/8″ (3.5mm) mini stereo output jack – monitor input / alternate ch. 4&5 inputs refer to manual for set up
TAPE OUT/MIX OUT: TA3-type unbalanced
Link Input/Output Above TAPE OUT / MIX OUT is also used to link to the Mix In of a 442 or 302
Impedance Inputs:
2.5k ohms (actual), XLR, mic setting, < 500 ohm Mics
16k ohms (actual), XLR, line setting, < 2k ohm outputs
150 ohms (actual), XLR factory Line setting, > = 600 ohm mics
150 ohms (actual), mic (lowest) setting, < 2k ohm outputs
Gain XLR Inputs:
75dB, mic / 35dB, line – XLR output @ factory (line) setting
0-16dB 2dB steps, mic / 40-56dB 2dB steps, line – XLR output attenuated
Hum & Noise EIN: -126dBu (-128 BV) max (22Hz – 22kHz bandwidth , flat filter, trim control fully up)
Frequency Response 20Hz – 30kHz, +0.2, -0.5dB, -1dB @ 5Hz and 50kHz typical
Distortion THD + Noise: 0.007% typical (1kHz, +4dBu at Line Out) 0.009 max (50Hz to 20kHz, +18dBu at Line out, fader fully up)
Metering Stereo (L/R) 20 segment, sunlight viewable LED meters
Control Voltage Out No
Phantom Power 12V, 12V-T & 48V
Operating Temperature Operating: -20 degrees to 60 degrees Celsius, 0 to 95% relative humidity (non-condensing)
Storage: -40 degrees to 85 degrees Celsius
Power 130mA @ 4.5V, internal batteries, idle, no phantom
55mA @ 12V external DC, idle, no phantom
Dimensions 1.8 x 8.4 x 4.5″ (47 x 214 x 114mm) (HxWxD)
Weight 1.8 lbs (0.85kg) unpackaged with three alkaline AA batteries






Tech Specs

Additional information

Weight 0.0000 kg
Dimensions 0.0000 x 0.0000 x 0.0000 cm
Quote Us

Have a Question? Submit it here!